The rainy season has arrived, you should be careful because the influence of the weather can cause damage to the roof of the house. A house that incidentally as a shelter if not maintained will make the building not as sturdy as it looks. For example, the tile is rarely treated resulting in leaks during the rainy season. Not only that leaky roof will also make water easily seep into the house itself. The roof can seep due to not cracking concrete, causing leakage. If you are looking for the best roof repair services, you can contact roofing Oshkosh Wi.

For those of you who are still beginners in overcoming the roof seeped can try to follow some of the following tips:

Know Beforehand Causes of Roof Seepage

The first step you can take to repair a seepage roof is to check the cause of the seepage earlier. Try checking the roof of the house to find the center of the leak. If the roof is seeping due to not cracking concrete, the possible causes are as follows:

  • When the concrete is cast and has not dried completely you have forged it with a load or a concrete slab exceeding its capacity.
  • The existence of extreme heat and cold temperatures that affect the concrete plate itself and cause shrinkage cracks.
  • No curing compound or treatment using standing water for 7 days.
  • There is a movement of building structures which results in unstable concrete slabs.
  • The thickness of the concrete cast does not meet existing standards or the mortar is less than perfect.
  • Concrete is not perfect when making or the cracks that are visible on the concrete.

How to Deal with a Seepage Roof

Well, here are some ways to deal with seepage roof that you can do:

Use Heat Resistant Coating

To make concrete on the roof of your house will be resistant to heat, then make a special coating. This special coating uses materials such as acrylic, additives and silica sand. Use a brush roller then labor the liquid onto the cracked surface. Guaranteed not leaky surface resolved and withstand the heat.

Apply Waterproofing

Waterproofing is often used as a solution for roofs that leak. First, lie down as deep as 2 cm and if the cracks are large enough you just need to solidify it with cement then flatten. After that use a brush that has been given fiber waterproofing on large cracks. It aims to cover smaller holes. Apply the waterproof evenly to the entire surface of the concrete.

Cover with Wall Paint

Even if you use a heat-resistant and waterproofing coating, the surface doesn’t need to use wall paint. Waterproofing has very elastic properties, a little sticky when dry so that wall paint is suitable to reduce its stickiness. Do this coating when the weather is really sunny so it dries quickly.

Utilize Bitumen Sheets for Flooded Areas

There are some concrete parts which also tend to be flooded during the rainy season. In this area take advantage of bitumen sheets which are suitable for flooded areas. Bitumen coatings are not suitable for areas that are directly exposed to sunlight. Then use cement powder and solvents which are also resistant to inundation but not strong enough to deal with ultraviolet light. Mix it evenly then lay it on a cracked surface.

Remember when working on waterproof, first clean the surface from dirt and do the coating twice. The distance between the layers of one with the second is at least 4 hours so that it is completely dry. The area to be waterproof must also be dry and not wet. Recognizing the leakage point will save you time in handling the seepage roof.